What to know when commissioning packaging design.
A packaging project starts with the product information and the pack format and dimensions. The design is delivered as print-ready files for every variant, with a 3D preview.

What should be ready before design starts?
A packaging project needs the product information and the pack format and dimensions. The variant list and the printer's requirements, where available, are shared at the start too. Together they set the scope of the design and the settings of the print file.
Tell Us About Your ProjectWhich stages does the project go through?
A packaging project starts with getting to know the product and the shelf, continues with concepts and development, and ends with a 3D presentation and print preparation.
Research
We get to know the product, the audience and the shelf, and study competing packs and the category.
Concepts
We set the colours, typography and pack format, then present two or three distinct concepts.
Development and 3D
We refine the chosen concept with your feedback and present it in 3D at its real size.
Print preparation
We set the dimensions, bleed and colour profile to the printer's requirements and prepare the file for print.
Which files are delivered?
A packaging project delivers a print-ready PDF for the printer, a separate print file for every variant and a 3D product preview. Render sets and e-commerce visuals are prepared as a separate scope.
Print-ready PDF
A print file checked for die lines, bleed and colour profile.
Variant files
A separate print file for every flavour, weight or product type.
3D product preview
It is included with packaging design and presented before approval.
Printer-specific output
If your printer needs a format other than PDF, we prepare the file in that format too.
Printer and proof support
We go through the technical details with the printer and check the proof when needed.
Editable source files
If you request them, the editable source files are delivered too.
What is checked before printing?
Before the packaging file goes to the printer, the bleed and die lines, colour values, barcode and copy are reviewed. A printed proof then confirms colour and cutting before the print run.

Bleed and cutting
Backgrounds run past the die line, while text sits a safe distance from folds and cuts.
Colour values
Colours are defined in CMYK or Pantone for the print method, and the result is confirmed on the proof.
Barcode
The barcode sits at a readable size, with dark bars on a light background, away from the die line.
Copy and proof
Mandatory information, spelling and figures get a final read, and a printed proof confirms colour and cutting.
What information must a pack carry?
For food packs, the Turkish Food Codex Regulation on Food Labelling and Consumer Information lists the mandatory information, and for cosmetics, the Cosmetic Products Regulation does. We take the label wording from you and set it on the pack in a readable layout.
Pre-packaged food
Food Labelling and Consumer Information Regulation · Articles 9 and 11
- Name of the food
- List of ingredients
- Substances causing allergies or intolerances
- Quantity of certain ingredients or categories of ingredients
- Net quantity
- Date of minimum durability or use-by date
- Special storage conditions and conditions of use
- Name or business name and address of the food business operator
- Business registration number or identification mark
- Country of origin
- Instructions for use where needed
- Actual alcoholic strength for drinks above 1.2% alcohol by volume
- Nutrition declaration
- Lot mark or number
Cosmetic product
Cosmetic Products Regulation · Article 22
- Name or registered name and address of the responsible person
- Country of origin for imported products
- Nominal content by weight or volume
- Date of minimum durability or period after opening
- Particular precautions for use
- Batch number or reference
- Function of the product, unless clear from its presentation
- List of ingredients on the outer packaging
Type size
On food packs, mandatory information is printed with an x-height of at least 1.2 mm. On packs whose largest surface is under 80 cm², the minimum is 0.9 mm.
Principal field of vision
The name of the food and the net quantity appear in the principal field of vision. The name is set with every word in the same size, typeface and style.
Language and legibility
Mandatory food information is given in Turkish, with clear contrast between text and background. On cosmetics, the nominal content, durability date, precautions and function are given in Turkish.
If you do not have a barcode number yet, we handle the application too. Barcode Application
Sources
How is a product range designed?
A range is built on a shared design system. The layout, typography and brand area stay fixed, while variants are told apart by colour or a symbol.
- On the shelf the range reads as one, and each product still stands apart.
- A new variant joins the same system instead of starting a new design.
- The variant name and colour code sit in the same place on every pack.

What should you look for in a packaging design studio?
Look for printed packs on real shelves, consistent variants within a range, print know-how and a quote that lists every file to be delivered.
- Printed packs in the portfolio that are already on shelves
- Work that keeps the variants of a range consistent
- Print know-how on die-cut templates, colour and barcodes
- A 3D preview before approval
- A quote that lists the files to be delivered
Our packaging projects
Let's prepare your packaging together.
Share your product and pack format, and our quote will set out the scope and every file you receive.







